Digi Stamps, Vintage Images, Digi Images, Image Transfers, Printables... everything for your paper crafting needs. New images and word art are posted every day.



Your "go to" blog for beauty, inspiration, digi goodness and new ideas! Serving the Digi Scrapbook and Card Makers and Journaling world for over 25 Years~!

* TIP JAR*

DONATE: Do you like what you see?, did it help you grow? Leave a little tip, to let me know. In case you would like to leave a tip to help keep all the freebies coming, safe and on one site. Thank you.





Tuesday, October 14, 2014

Autumn Coaster Project .......


Pumpkin Coaster.........these are so super simple to make..........and they make such awesome gifts.

Directions:  The coaster is a stone tile that I purchased from a home improvement store.  You need to print out your image/s on a laser printer.  Make sure your image is mirrored.

Apply a thin coat of Mod podge to the image side of the paper.
Then, very carefully, lay the printed side, with the Mod Podge onto the center of the tile.
Smooth out any air bubbles, trying not to move the graphic.
Let the Mod Podge dry for a couple of hours...until it is completely dry.  When dry, mist with water.  Make sure you get all the paper, but don't get it too wet.  
Gently but firmly, rub the paper off the tile using your finger.  You want to rub off the paper and leave the image behind.  Don't rub too hard.  If the paper gets dry, you can mist it again.
When you have the amount of paper off that you want, you can seal it with a spray or more Mod Podge.

12 comments:

  1. Paulette, How do you make the coasters? Edwina Brown

    ReplyDelete
  2. I agree with Edwina, they are super cute so how do you make them?

    ReplyDelete
  3. Paulette thanks for your instructions on how to make coasters,this is something I'd love to try for gifts!

    ReplyDelete
  4. Kiwi...they are very inexpensive also.
    Paulette

    ReplyDelete
  5. Paulette, Thank you so much for the instructions. Edwina Brown

    ReplyDelete
  6. Where can we get this image?? I didn't see it in the store????
    Thanks as always

    ReplyDelete
  7. Very cool now if only I had access to a laser printer!

    ReplyDelete
  8. Very cool! Now if only I had access to a laser printer!

    ReplyDelete
  9. If you are interested in the image, contact me.
    Paulette

    ReplyDelete
  10. Beautiful coaster! Thanks for the directions- sounds like something I could make with my first graders:-)

    ReplyDelete

Thank you for your comments, they are appreciated.
Paulette